Morfe Vinyl Windows and Doors are Produced with the design engineering of the highest standards and product performance.
Morfe Windows warrants to you, the original purchaser, that any window or door manufactured by Morfe is free of manufacturing and/or material defects. This warranty applies as long as the purchaser resides in the home in which windows or doors were originally installed.
This Warranty covers only those manufacturing and material defects as specified herein and does not include defects or damages attributed to installation, normal weathering or defects caused by weathering or defects caused by accident, fire, flood. Acts of God, vandalism, riot or civil disorder, misuse, abuse by harmful fumes, vapes, or chemical pollutants in the atmosphere, mildew, building settlement or structural failure of walls or foundations or if subject to stresses resulting from localized heat which causes excessive temperature differentials over the glass surface and edges or any other causes or occurrences beyond Morfe’s control.
Vinyl Frames: Will not materially rot, rust, cracks warp, pit, corrode, peel or blister as long as the original purchaser resides in the home in which windows or doors were installed.
Parts and Hardware: Will not break, crack, or otherwise fail for as long as the original purchaser resides in the home in which windows or doors were installed. Screen: Frame will not crack or break, screen cloth will mot rot for as long as the original purchaser resides in the home in which windows or doors were installed.
Insulated Glass: Will not have seal failure for as long as the original purchaser resides in the home in which the windows or doors were installed. Glass units will be free from material obstructions inside the unit caused by film formation, dust or moisture inside the dead air space for as long as the original purchaser resides in the home in which the windows or doors were installed.
Glass Breakage: Any glass unites broken within 3 years of manufacture (tempered specifically excluded) will be replaced at no charge to the original purchaser. (Windows covered under Morfe’s customer replacement plan excluded.)
Wood: Wood used in Morfe’s construction of bow and bay units may be damaged by excessive condensation, leaving windows partially open to outside moisture, aging, failure, caulking, improper installation, and many other occurrences. Morfe will replace or repair wood only if damage is caused by manufacturing defects of the windows themselves within 18 months of the date of manufacture. Bow and Bay Units must be installed with a full roof (unless proper overhand is present) and with adequate
support underneath the unit to prevent sagging and to ensure squareness. If roofs or supports are not present. Damages will not be covered by this warranty and Morfe will be held harmless from any claims.
Labor Costs: Labor costs for replacing/repairing any part furnished by Morfe under this warranty, for the first year after manufacturing date only, will be paid by Morfe. Labor not performed by Morfe will be subject to the standard rates directed by Morfe after one year from the date of manufacture, labor costs are not included under this warranty and neither Morfe nor its distributors or dealers will be responsible for any labor costs for removing, replacing, installing or reinstalling any window, door, or part furnished by Morfe under this warranty.
Caulking: Caulking is used on most window installations but is not part of the window and is not covered in any respect by this warranty.
Condensation: Condensation or frost on the inside surfaces of the insulated glass window or door does not indicate a defect in the window or door in the installations of the window or door and is not covered in any respect by this warranty.
Discontinuance: Morfe reserves the right to discontinue or change any part or item used in the construction of its windows and doors. Replacement or warranted parts also can be discontinues or substituted and any time.
Exercise of Warranty: The original purchaser shall notify the dealer or distributor from whom the windows were purchased promptly with any claim for defect. The dealer or distributor will then contact Morfe with necessary information to process warranty claims. Morfe and/or its dealer or distributor must be given a reasonable amount of time to inspect the product for which the claim was made. Morfe its dealer or distributor will then repair or replace the defective part only after inspection or if inspection in not practical, after the original purchaser returns the defective part to Morfe. Morfe will then ship the repair part to the original purchaser or the nearest dealer or distributor. The original purchaser will be responsible for freight ot postage charges. Proof of the original purchase is required before replacement or repair of any parts. The remaining warranty period will apply to the replacement or repaired parts.